Saws, Notchers & Welders

PVC, WPC, Composite, & Aluminum for the Fence, Deck, & Rail Industry

Automatic Saws

VCS 16, VCS 18, VCS 20, VCS 24

Our VCS-Series Cut-Off Saw features a Patented V-Table. This V-Table holds all of the parts in the cavity together. The software calculates your measurements automatically.

The VCS-Series is equipped with ATD, and it meets OSHA specifications. Cuts: (1) 6.5” x 6.5” post at once, (3) 5” x 5” posts at once, (4) 4” x 4” posts at once, (5) 2” x 6.5” rails at once, (80) 1” x 1” pickets at once, (30) 7/8” x 3” pickets at once.

FEATURES:

16 - 24” Blade
16’ Infeed V-Table
8’ Drop V-Table
AOO Technology
Industrial Embedded Control System
Industrial Clamping System
Ball Screw Technology
ForceDRIVE Technology
IntelliSAW Software
Programmable Cut Length
AC Servo Control System
VGC Control
Wi-Fi/Ethernet Connections

ACCESSORIES:

20’ Cutting Table
24’ Cutting Table
Custom Lengths
Auto Load System
Aluminum Cutting
Automatic Banding
Auto Stacker System
Optimization Software
Bar Code Capabilities
Chip Collection System
Additional Drop Table Length

Manual Saws

Liberty 514

FEATURES:

14" Blade
9' Drop Table
11' Feed Table
Handles a 24' post
Industrial Measuring Arm
Manual Positioning System
Can cut a 5"x5"

ACCESSORIES:

Semi Automatic Banding
Vacuum Chip Collection System
Additional Table Length
Additional Drop Table Length
Pneumatic Clamping System
Automatic Positioning System
Additional Measuring Arm Length

Notchers

CMM Notch-A-Lok

FEATURES:

5’ Freestanding Roller Table
Safety Lockouts
Actuator
(2) 3/4” Notch for Rails (4” Center to Center)
1/2” Notch for Pickets
State-of-the-Art Notching Technology
Pneumatic Control System
Dual Action Cylinder Technology

OPTIONAL FEATURES:

Multi Position Dies in 1/2" Increments
Extra Dies
Extra Punches
Automatic Notching
Additional Table Length
Notches Both Sides per Cycle
Notches Both Pickets and Rails

Vinyl Welder

The VW-100 is the first Vinyl Welder designed specifically for the Vinyl Fencing Industry. Unlike the “window welders” the VW-100 uses no spacers, templates, or jigs. There are no long changeover times. The VW-100 will weld gates and straight posts. Extend a post or make a vinyl gate.

FEATURES:

Safety Lockouts
Protective Guarding
Single Point Welder
0 to 60°F Scale Teflon Coated Heat Plate
Variable Temperature Control (0 to 525°F)
Fully Programmable Cycle Times
Top Pneumatic Clamping System

OPTIONAL FEATURES:

Corner Cleaning Kit
Material Stands
Extra Heat Plate
Two Point Welding
Four Point Welding